Details
Key Product for the professional carpet cleaner. Reducing agent for removing coffee, tea, wine or dye stains.
You must pre-test for this product, and use care and attention.
Removes dye stains from carpets and upholstery. Extremely popular, effective and cost effective reducing agent for removing coffee, tea, wine or dye stains.
Can be accelerated using the heat transfer method.
Just spray, allow to dry and vacuum away (that is if site tests in a suitably inconspicuous area reveal that it is safe to do so).
Other wise monitor, leave dwell time, and rinse thoroughly.
If time is a problem neutralise with cold water and blot out with dry clean white towelling (or extract with wet vacuum or dry with extraction machine).
An application of Professional Spot Lifter before can help on stubborn stains by introducing a wetting agent.
- Effective on new or old spots
Designed to modify and reduce stain colour on even the most stubborn stains areas. Just spray on spot, allow to dry, and vacuum the area. If using a pre-spray, just spray spot, wait 10-15 minutes, and clean.
An application of Professional Spot Lifter before use can help on stubborn stains by introducing a wetting agent.
Fast, easy solution for a variety of spots
Specifically formulated to remove tannin stains such as urine, cola, and coffee. Watch BetadineTM and some iodines quickly and effectively go away. You will love the results!
Hints and Tips
Easy to Use Guide: (please check instructions on container & MSDS.)
Place funnel in a 1L spray bottle and add 1 scoop (11/2 oz )of Spray n GoTM and fill with hot water.
- close tightly, and shake until dissolved (approx. 2-3 times). Spray spot completely until moist. Allow to dry and either vacuum or wet clean the area. Neutralise on wool with cold water.
To make 4L of read-to-use product, just mix 6 scoops in a 4L container, fill with hot water, and mix until dissolved.
Helpful Hints
When cleaning stubborn stains, pre spray with an enzyme product such as Prekleen or Enzall mixed according to direction on label.
Allow area to soak for 5 minutes to 1 hour and extract/rinse with cool water. Then apply Spray n GoTM and top with Chemspec’s Absorb-A-Stain. Allow to dry and vacuum.
For BetadineTM or severe dye stains, apply Spray n Go, allow to sit overnight, then vacuum away any powder residue that may be present. Pre-test in an inconspicuous area prior to use to ensure that the dye will not be affected.
Please ring the Help Lines to discuss if you have the slightest query.. 0800 024 24 42, or 01922 458 807. We would be delighted to help however we can.
pH of 1% solution: 4.5 - 5.5.
Coverage: N/A.
Dilution: 1 scoop to 1 litre of warm water (variable).
Appearance: White powder with yellow flakes.
[Common MisSpell "Spray & Go, Spray and Go"].
Fragrance: Sulphite. (Do not inhale the pungeant odour directly from or directly over the product jar itself).
Packaging: 1 x 900 Jar ( Or case of 6). Selling Unit: Each
Additional Information
| Download Fact Sheet | MSDS Sheet |
|---|
Check items to add to the cart or select all
You have no items in your shopping cart.
You have no items to compare.
